Anyconnect gives error : Not calling vpn_remove_uauth: not IPv4! webvpn_svc_np_tear_down: no ACL
Error message when connecting to Anyconnect:
==============================================
Not calling vpn_remove_uauth: not IPv4!
webvpn_svc_np_tear_down: no ACL webvpn_svc_np_tear_down: no IPv6 ACL
So for me the issue was :
Anyconnect was trying to establish connection with Default RA group tunnel-group.
There was no IP pool called under it.
I then enabled tunnel-group-list enable under Webvpn
and
tunnel-group Bangalore webvpn-attributes
group-alias Bangalore enable
This resolved the issue.
==============================================
Not calling vpn_remove_uauth: not IPv4!
webvpn_svc_np_tear_down: no ACL webvpn_svc_np_tear_down: no IPv6 ACL
So for me the issue was :
Anyconnect was trying to establish connection with Default RA group tunnel-group.
There was no IP pool called under it.
I then enabled tunnel-group-list enable under Webvpn
and
tunnel-group Bangalore webvpn-attributes
group-alias Bangalore enable
This resolved the issue.
3 comments:
For me it was the ASA client installed on a Windows 7...
For me it was an older AnnyConnect vesion installed on a Windows 7.
@brusamp, Thank you for your time to add a comment. Much appreciated.
Post a Comment